Ứng dụng AI cho nhà sản xuất và nhà máy

Ứng dụng trong ngành nghề này

• Production Shift Handover

  Turns a shift's raw production log into a structured handover note for the incoming supervisor.

• Downtime Reason Coder

  Assigns a standard downtime reason code to a described machine stoppage for OEE reporting.

• Nonconformance Report Draft

  Writes a formal nonconformance report from an inspector's rough observation notes.

• Five Whys Chain

  Builds a five whys causal chain and a probable root cause from a described production problem.

• Machine Fault Triage

  Lists ranked probable causes and the confirming check for each from a described equipment symptom.

• Maintenance Checklist Builder

  Produces a grouped preventive maintenance checklist for an asset at a stated service interval.

• Toolbox Talk Generator

  Writes a five minute shop floor safety briefing on a chosen hazard for the crew.

• Near Miss Risk Rating

  Rates a reported near miss on severity and likelihood and returns a risk band with controls.

• Quote Spec Extractor

  Pulls the quotable specifications and the blocking clarification questions out of a customer enquiry.

• Work Instruction Translator

  Translates a shop floor work instruction into another language while preserving every step and value.

• Scrap Log Analyzer

  Ranks defect types, shares and scrap rate from pasted scrap log rows for a production period.

• Eight D Report Draft

  Drafts a structured 8D corrective action report from a customer or internal quality complaint.

• Audit Finding Classifier

  Grades a quality audit finding as major, minor, observation or improvement opportunity with reasoning.

• Supplier Deviation Notice

  Writes a formal notice to a supplier about a nonconforming delivery with the action required.

• OEE Loss Commentary

  Recomputes OEE from entered figures and explains which loss factor to attack first.

• Control Logic Explainer

  Explains a pasted PLC ladder or structured text routine in plain language for the maintenance team.

• Bill Of Materials Cleaner

  Normalises a pasted bill of materials into clean columns and flags the lines a planner must fix.

• Kaizen Idea Scorer

  Screens a shop floor improvement suggestion with scores and a do now or reject verdict.

• Make Or Buy Verdict

  Recommends making a part in house, buying it out or dual sourcing, with arguments and open data gaps.

• Machine Spec Digest

  Condenses an equipment datasheet into key specs and says whether it fits your site and application.

• Process FMEA Starter

  Turns a described process step into draft PFMEA rows with failure modes, effects, causes and controls.

• Control Plan Draft

  Drafts control plan rows for a process, one per characteristic, with method, frequency and reaction plan.

• Dimension Report Checker

  Compares measured dimensions against their tolerances and flags every out-of-tolerance feature.

• Material Certificate Check

  Checks a pasted material or mill certificate against the grade requirements you specify.

• Capability Study Verdict

  Reads capability study figures and says whether the process is capable, centred and ready to release.

• Work Order Writer

  Turns a rough repair request into a complete maintenance work order ready for the system.

• Spare Part Criticality

  Scores a spare part for criticality and recommends whether to stock it, order it on demand or drop it.

• Lockout Tagout Steps

  Builds a step by step lockout tagout procedure for a machine from its energy sources.

• Safety Data Sheet Digest

  Reduces a pasted safety data sheet to the handling, protection and first aid the shop floor needs.

• Job Hazard Breakdown

  Breaks a task into steps and gives the hazard, exposure and control for each one.

• Waste Walk Classifier

  Sorts shop floor observations into the eight lean wastes and ranks what to remove first.

• Changeover Time Reducer

  Splits a changeover into internal and external steps and proposes a shorter sequence.

• Five S Audit Score

  Scores a work area against the five S standards and gives the actions that lift the weakest one.

• Error Proofing Ideas

  Proposes poka-yoke controls that make a recurring mistake hard or impossible to repeat.

• Job Sequence Planner

  Orders a list of open jobs into a run sequence and explains the trade-offs behind it.

• Supplier Scorecard Comment

  Turns supplier delivery and quality figures into a scorecard commentary with the actions to demand.

• Quote Comparison Verdict

  Compares supplier quotes on a common basis and recommends which one to award.

• Stock Item Classifier

  Classifies stock lines into ABC value bands and gives the stocking rule for each band.

• Change Request Draft

  Writes a formal engineering change request with the reason, the impact and the approvals needed.

• Manufacturability Review

  Reviews a part description against the chosen process and lists the features that will cause trouble.

• Material Selection Shortlist

  Shortlists candidate materials for a part and names the trade-off that decides between them.

• Process Parameter Adviser

  Suggests the parameter changes most likely to remove a recurring process defect.

• Spec Sheet Writer

  Turns internal engineering data into a clean customer facing product specification sheet.

• Skills Gap Planner

  Compares operator skills against what the line needs and returns a ranked training plan.

• Operator Quiz Builder

  Generates competency questions and an answer key from a work instruction to verify training.

• Customer Complaint Reply

  Drafts the reply to a customer quality complaint, with what was found and what happens next.

• Packing Instruction Writer

  Writes the packing and labelling instruction for a part so it ships without transit damage.

• Calibration Due List

  A dated list of every instrument already overdue for calibration and every one falling due inside your chosen window.

• Cycle Time Bottleneck

  A ranked operation by operation cycle time table that names the bottleneck holding your line back.

• Batch Record Review

  A list of the missing entries and out of limit values in a completed batch record, with the questions to put to the operator.

• Manual Procedure Finder

  The numbered procedure for one maintenance task, drawn only from the machine manual you upload.

• Energy Invoice Breakdown

  A line by line breakdown of a site energy invoice, including the energy consumed per unit produced.

• Supply Agreement Risks

  A clause referenced map of the obligations, penalties and termination triggers buried in a supply agreement.

• Breakdown Log Digest

  A ranking of your worst assets by downtime, with the faults that keep coming back on each one.

• Spec Compliance Matrix

  A clause by clause verdict on whether your plant can meet a customer specification, with a compliance percentage.

• Incoming Inspection Plan

  A receiving inspection plan listing every characteristic, its tolerance, method, sample size and accept rule.

• Nameplate Asset Record

  A typed asset record, make, model, serial and ratings, read straight off a photo of a machine nameplate.

• Part Defect Describer

  An objective description and defect classification of a photographed part, ready to paste into a nonconformance record.

• Pallet Label Capture

  Every field on an incoming pallet label typed out and checked against the purchase order you expected.

• HMI Screen Decoder

  A transcription of the fault on a machine screen, what it is reporting, and the safe checks to make before calling maintenance.

• Tool Wear Describer

  A description of the wear visible on a photographed cutting edge, with a severity rating out of five.

Câu hỏi về các ứng dụng này

Ứng dụng có thể làm theo cách chúng tôi làm việc không?

Có. Mỗi gói bao gồm một số ứng dụng bạn có thể tùy chỉnh, để các trường và chỉ dẫn của chúng phù hợp với cách làm việc của riêng bạn.

Chúng tôi cần cung cấp những gì?

Chỉ nội dung mà các trường yêu cầu, chẳng hạn ghi chú, một tin nhắn hoặc một đoạn trích tài liệu. Đừng chia sẻ dữ liệu cá nhân nhiều hơn mức công việc cần.

Chúng tôi có thể chạy các ứng dụng này từ phần mềm của mình không?

Có. API Ultineo AI khởi chạy bất kỳ ứng dụng nào dự án của bạn được dùng và trả về câu trả lời khi lượt chạy hoàn tất.