AI-applikationer för energi- och försörjningsbolag

Applikationer i den här branschen

• Outage Notice Composer

  Returns a ready-to-send customer notice about a supply interruption, written from the incident facts you paste.

• Network Fault Priority

  Returns a priority level, fault category, crew type and justification for an incoming network fault report.

• Outage Cause Coder

  Returns a standard outage cause code, sub-cause, confidence level and supporting evidence from a field report.

• Meter Reading Sanity Check

  Returns the calculated consumption, daily average and a verdict on whether a submitted meter reading should be accepted or queried.

• Bill Spike Explainer

  Returns a plain-language explanation a contact-centre agent can read out for why a customer's energy bill increased.

• Tariff Fit Advisor

  Returns a recommended tariff and runner-up from the options you paste, with reasons tied to the customer's usage pattern.

• Site Survey Extractor

  Returns the technician's solar site survey as a structured field-by-field record with gaps marked.

• Solar Proposal Narrative

  Returns a customer-facing written summary of a proposed solar or battery installation from its technical specification.

• Pre Job Safety Brief

  Returns a five-minute pre-job safety briefing for the described utility field task and site conditions.

• Switching Sequence Reviewer

  Returns a list of ordering gaps, missing earthing steps and ambiguous wording found in a written switching schedule.

• Energy Audit Digest

  Returns a structured write-up of a site energy walkthrough with losses grouped by system and measures ranked by effort.

• Charge Point Fault Triage

  Returns ranked likely causes plus remote and on-site checks for a reported EV charge point fault.

• Utility Complaint Reply

  Returns a formal reply to a utility customer complaint based on your investigation findings and approved remedy.

• Priority Services Screener

  Returns a vulnerability score, support band and the actions to offer a customer on the priority services register.

• Work Order Clarifier

  Returns a clear, step-by-step field work order expanded from a dispatcher's shorthand note.

• Leak Report Prioritiser

  Returns an urgency score, response band and the crew to send for a reported water leak.

• Connection Pack Checklist

  Returns the grouped checklist of documents, drawings and consents needed for a network connection application.

• Field Notice Translator

  Returns a customer notice about planned works or supply interruptions translated into the target language.

• Tender Obligation Extractor

  Returns every supplier obligation found in a pasted utility tender clause, with clause reference, type and deadline.

• Substation Patrol Digest

  Returns a condition summary, tagged new defects and the status of previously open defects from substation patrol notes.

• Major Outage Review

  Returns a structured post-incident review of a major supply interruption with timeline, contributing factors and lessons.

• Control Room Handover

  Returns a clean control room handover note grouped by live faults, work in progress and watch items.

• Commissioning Test Reviewer

  Returns a pass or fail verdict for each commissioning test result against the acceptance limits you paste.

• Asset Health Scorer

  Returns a condition score, health band and intervention window for a network asset from its inspection findings.

• Asset Replacement Case

  Returns a written investment justification for replacing or refurbishing an ageing network asset.

• Streetworks Notice Drafter

  Returns highway-authority and resident wording for a planned excavation, covering dates, traffic management and access.

• Field Incident Report

  Returns a formal incident report from a field account, with the sequence of events, injuries and immediate actions.

• Near Miss Categoriser

  Returns a hazard category, potential severity and a toolbox-talk learning point for a reported near miss.

• Root Cause Walkthrough

  Returns a five-why chain, the underlying root cause and corrective actions for an equipment or process failure.

• Water Quality Triage

  Returns likely causes, urgency and customer advice for a report of discoloured, cloudy or bad-tasting tap water.

• Pollution Incident Note

  Returns a regulator-ready description of a discharge or spill, covering cause, extent, containment and follow-up.

• Effluent Consent Check

  Returns a per-parameter comparison of sample results against the discharge consent limits you paste, with breaches flagged.

• Unsafe Appliance Notice

  Returns the customer warning notice for a gas appliance an engineer has found and classified as unsafe.

• Turbine Alarm Advisor

  Returns ranked causes, reset guidance and the site visit trigger for a wind turbine alarm sequence.

• Heat Pump Screener

  Returns a heat pump suitability verdict with the blockers, implied fabric work and the questions a surveyor must answer.

• Retrofit Plan Sequencer

  Returns the home energy measures you listed put into a sensible order, with the reason each one comes first.

• Repayment Plan Letter

  Returns a supportive letter setting out an energy debt repayment arrangement from the balance and circumstances supplied.

• Complaint Router

  Returns the category, severity, owning team and deadline flag for an inbound utility complaint.

• Tariff Terms Digest

  Returns a plain-language key-facts summary of the energy contract terms you paste, with the costly clauses highlighted.

• Tenancy Change Checklist

  Returns the readings, data and confirmations needed to close one occupier's supply account and open the next.

• Home Energy Action Plan

  Returns a homeowner-friendly plan explaining each energy certificate recommendation and what installing it involves.

• Load Profile Reader

  Returns what a described consumption pattern says about a site, with anomalies and questions for the site contact.

• Emissions Data Extractor

  Returns the energy and fuel activity data found in your notes, structured with units, source and scope gaps marked.

• Energy Claim Checker

  Returns a risk rating and a safer rewrite for each environmental claim in your energy marketing copy.

• Regulation Clause Brief

  Returns a plain-English briefing on a pasted licence or regulatory clause, listing obligations and who they fall on.

• Authorisation Gap Check

  Returns the competencies a technician still needs for a task, with the evidence required and an interim arrangement.

• Wayleave Terms Summary

  Pulls the access rights, payments, notice periods and termination terms out of a signed wayleave or easement agreement.

• PPA Clause Digest

  Turns a power purchase agreement into a one-page digest of price mechanism, term, volume commitments and exit routes.

• Network Charge Breakdown

  Breaks a network use-of-system invoice into its charge components and flags the lines that look out of place.

• Calibration Cert Reader

  Reads a calibration or test certificate and returns the instrument details, result and next-due date as one register line.

• Method Statement Review

  Reviews a contractor's risk assessment and method statement and lists the sections, controls and approvals that are missing.

• Portfolio Usage Outliers

  Scans a multi-site consumption export and names the sites whose usage pattern no longer matches the rest.

• Monthly Energy Narrative

  Turns the monthly metering export into the written commentary that goes in front of the board.

• Gas Safety Record Digest

  Reads a gas safety record and separates the appliances that passed from the defects needing action, with their dates.

• Guaranteed Standards Check

  Reads an interruption or case record and says whether a guaranteed standards payment is due, and on what grounds.

• Meter Face Reader

  Reads the register, serial number and meter type from a photo of a meter and flags any digit it cannot see clearly.

• Asset Plate Capture

  Turns a photo of an equipment rating plate into a filled-in asset register line.

• Storm Damage Triage

  Sorts a photo of storm-damaged network plant into an urgency band with the hazards visible in the picture.

• Vegetation Clearance Note

  Looks at a photo of trees near an overhead line and recommends cutting now, scheduling, or leaving it to monitor.

• Repair Photo Writeup

  Drafts the completion note for the job record from the photo the technician took at the end of the repair.

Frågor om de här applikationerna

Kan en applikation följa vårt sätt att arbeta?

Ja. Varje plan omfattar ett antal applikationer som du kan anpassa, så att deras fält och instruktioner följer ditt eget arbetssätt.

Vad behöver vi lämna?

Endast det innehåll som fälten efterfrågar, till exempel anteckningar, ett meddelande eller ett utdrag ur ett dokument. Dela inte fler personuppgifter än uppgiften kräver.

Kan vi köra de här applikationerna från vår egen programvara?

Ja. API:et för Ultineo AI startar alla applikationer som ditt projekt kan använda och returnerar svaret när körningen är klar.