Pramonė ir darbas vietoje · Energetika ir komunalinės paslaugos

Dirbtinio intelekto programos energetikos ir komunalinių paslaugų tiekėjams

Rašykite pranešimus apie sutrikimus, nustatykite tinklo gedimų prioritetus, tikrinkite skaitiklių rodmenis ir aiškinkite sąskaitas bei tarifus.

Ką šios programos atlieka

Apie sutrikimus pranešta

Rengkite pranešimus apie sutrikimus, koduokite sutrikimo priežastį ir nustatykite tinklo gedimų prioritetus.

Rodmenys patikrinti

Patikrinkite skaitiklio rodmens patikimumą ir išgaukite objekto apžiūros duomenis.

Sąskaitos paaiškintos

Paaiškinkite klientui staigų sąskaitos padidėjimą ir patarkite dėl jo vartojimui tinkamo tarifo.

Šios veiklos srities programos

  • Outage Notice Composer

    Returns a ready-to-send customer notice about a supply interruption, written from the incident facts you paste.

  • Network Fault Priority

    Returns a priority level, fault category, crew type and justification for an incoming network fault report.

  • Outage Cause Coder

    Returns a standard outage cause code, sub-cause, confidence level and supporting evidence from a field report.

  • Meter Reading Sanity Check

    Returns the calculated consumption, daily average and a verdict on whether a submitted meter reading should be accepted or queried.

  • Bill Spike Explainer

    Returns a plain-language explanation a contact-centre agent can read out for why a customer's energy bill increased.

  • Tariff Fit Advisor

    Returns a recommended tariff and runner-up from the options you paste, with reasons tied to the customer's usage pattern.

  • Site Survey Extractor

    Returns the technician's solar site survey as a structured field-by-field record with gaps marked.

  • Solar Proposal Narrative

    Returns a customer-facing written summary of a proposed solar or battery installation from its technical specification.

  • Pre Job Safety Brief

    Returns a five-minute pre-job safety briefing for the described utility field task and site conditions.

  • Switching Sequence Reviewer

    Returns a list of ordering gaps, missing earthing steps and ambiguous wording found in a written switching schedule.

  • Energy Audit Digest

    Returns a structured write-up of a site energy walkthrough with losses grouped by system and measures ranked by effort.

  • Charge Point Fault Triage

    Returns ranked likely causes plus remote and on-site checks for a reported EV charge point fault.

  • Utility Complaint Reply

    Returns a formal reply to a utility customer complaint based on your investigation findings and approved remedy.

  • Priority Services Screener

    Returns a vulnerability score, support band and the actions to offer a customer on the priority services register.

  • Work Order Clarifier

    Returns a clear, step-by-step field work order expanded from a dispatcher's shorthand note.

  • Leak Report Prioritiser

    Returns an urgency score, response band and the crew to send for a reported water leak.

  • Connection Pack Checklist

    Returns the grouped checklist of documents, drawings and consents needed for a network connection application.

  • Field Notice Translator

    Returns a customer notice about planned works or supply interruptions translated into the target language.

  • Tender Obligation Extractor

    Returns every supplier obligation found in a pasted utility tender clause, with clause reference, type and deadline.

  • Substation Patrol Digest

    Returns a condition summary, tagged new defects and the status of previously open defects from substation patrol notes.

  • Major Outage Review

    Returns a structured post-incident review of a major supply interruption with timeline, contributing factors and lessons.

  • Control Room Handover

    Returns a clean control room handover note grouped by live faults, work in progress and watch items.

  • Commissioning Test Reviewer

    Returns a pass or fail verdict for each commissioning test result against the acceptance limits you paste.

  • Asset Health Scorer

    Returns a condition score, health band and intervention window for a network asset from its inspection findings.

  • Asset Replacement Case

    Returns a written investment justification for replacing or refurbishing an ageing network asset.

  • Streetworks Notice Drafter

    Returns highway-authority and resident wording for a planned excavation, covering dates, traffic management and access.

  • Field Incident Report

    Returns a formal incident report from a field account, with the sequence of events, injuries and immediate actions.

  • Near Miss Categoriser

    Returns a hazard category, potential severity and a toolbox-talk learning point for a reported near miss.

  • Root Cause Walkthrough

    Returns a five-why chain, the underlying root cause and corrective actions for an equipment or process failure.

  • Water Quality Triage

    Returns likely causes, urgency and customer advice for a report of discoloured, cloudy or bad-tasting tap water.

  • Pollution Incident Note

    Returns a regulator-ready description of a discharge or spill, covering cause, extent, containment and follow-up.

  • Effluent Consent Check

    Returns a per-parameter comparison of sample results against the discharge consent limits you paste, with breaches flagged.

  • Unsafe Appliance Notice

    Returns the customer warning notice for a gas appliance an engineer has found and classified as unsafe.

  • Turbine Alarm Advisor

    Returns ranked causes, reset guidance and the site visit trigger for a wind turbine alarm sequence.

  • Heat Pump Screener

    Returns a heat pump suitability verdict with the blockers, implied fabric work and the questions a surveyor must answer.

  • Retrofit Plan Sequencer

    Returns the home energy measures you listed put into a sensible order, with the reason each one comes first.

  • Repayment Plan Letter

    Returns a supportive letter setting out an energy debt repayment arrangement from the balance and circumstances supplied.

  • Complaint Router

    Returns the category, severity, owning team and deadline flag for an inbound utility complaint.

  • Tariff Terms Digest

    Returns a plain-language key-facts summary of the energy contract terms you paste, with the costly clauses highlighted.

  • Tenancy Change Checklist

    Returns the readings, data and confirmations needed to close one occupier's supply account and open the next.

  • Home Energy Action Plan

    Returns a homeowner-friendly plan explaining each energy certificate recommendation and what installing it involves.

  • Load Profile Reader

    Returns what a described consumption pattern says about a site, with anomalies and questions for the site contact.

  • Emissions Data Extractor

    Returns the energy and fuel activity data found in your notes, structured with units, source and scope gaps marked.

  • Energy Claim Checker

    Returns a risk rating and a safer rewrite for each environmental claim in your energy marketing copy.

  • Regulation Clause Brief

    Returns a plain-English briefing on a pasted licence or regulatory clause, listing obligations and who they fall on.

  • Authorisation Gap Check

    Returns the competencies a technician still needs for a task, with the evidence required and an interim arrangement.

  • Wayleave Terms Summary

    Pulls the access rights, payments, notice periods and termination terms out of a signed wayleave or easement agreement.

  • PPA Clause Digest

    Turns a power purchase agreement into a one-page digest of price mechanism, term, volume commitments and exit routes.

  • Network Charge Breakdown

    Breaks a network use-of-system invoice into its charge components and flags the lines that look out of place.

  • Calibration Cert Reader

    Reads a calibration or test certificate and returns the instrument details, result and next-due date as one register line.

  • Method Statement Review

    Reviews a contractor's risk assessment and method statement and lists the sections, controls and approvals that are missing.

  • Portfolio Usage Outliers

    Scans a multi-site consumption export and names the sites whose usage pattern no longer matches the rest.

  • Monthly Energy Narrative

    Turns the monthly metering export into the written commentary that goes in front of the board.

  • Gas Safety Record Digest

    Reads a gas safety record and separates the appliances that passed from the defects needing action, with their dates.

  • Guaranteed Standards Check

    Reads an interruption or case record and says whether a guaranteed standards payment is due, and on what grounds.

  • Meter Face Reader

    Reads the register, serial number and meter type from a photo of a meter and flags any digit it cannot see clearly.

  • Asset Plate Capture

    Turns a photo of an equipment rating plate into a filled-in asset register line.

  • Storm Damage Triage

    Sorts a photo of storm-damaged network plant into an urgency band with the hazards visible in the picture.

  • Vegetation Clearance Note

    Looks at a photo of trees near an overhead line and recommends cutting now, scheduling, or leaving it to monitor.

  • Repair Photo Writeup

    Drafts the completion note for the job record from the photo the technician took at the end of the repair.

Kaip veikia programa

Pasirinkite darbą

Kiekviena programa apima vieną veiklos srities užduotį, aprašytą vienu sakiniu.

Užpildykite jos laukus

Įklijuokite savo pastabas, žinutę ar dokumento ištrauką į laukus, kurių prašo programa.

Naudokite atsakymą

Perskaitykite struktūrizuotą rezultatą, kurį galite nukopijuoti, išsiųsti ar išsaugoti, arba gaukite jį per „Ultineo AI“ API.

Perduokite šiuos darbus „Ultineo AI“

Papasakokite, kurių programų reikia jūsų komandai, ir mes atidarysime jūsų prieigą.

Klausimai apie šias programas

Taip. Kiekviename plane yra tam tikras skaičius programų, kurias galite pritaikyti, kad jų laukai ir instrukcijos atitiktų jūsų praktiką.

Tik turinį, kurio prašo laukai, pavyzdžiui, pastabas, žinutę ar dokumento ištrauką. Nebendrinkite daugiau asmens duomenų, nei reikia užduočiai.

Taip. „Ultineo AI“ API paleidžia bet kurią programą, kurią gali naudoti jūsų projektas, ir grąžina jos atsakymą, kai vykdymas baigiamas.