제조업체와 공장을 위한 AI 애플리케이션

이 업종의 애플리케이션

• Production Shift Handover

  Turns a shift's raw production log into a structured handover note for the incoming supervisor.

• Downtime Reason Coder

  Assigns a standard downtime reason code to a described machine stoppage for OEE reporting.

• Nonconformance Report Draft

  Writes a formal nonconformance report from an inspector's rough observation notes.

• Five Whys Chain

  Builds a five whys causal chain and a probable root cause from a described production problem.

• Machine Fault Triage

  Lists ranked probable causes and the confirming check for each from a described equipment symptom.

• Maintenance Checklist Builder

  Produces a grouped preventive maintenance checklist for an asset at a stated service interval.

• Toolbox Talk Generator

  Writes a five minute shop floor safety briefing on a chosen hazard for the crew.

• Near Miss Risk Rating

  Rates a reported near miss on severity and likelihood and returns a risk band with controls.

• Quote Spec Extractor

  Pulls the quotable specifications and the blocking clarification questions out of a customer enquiry.

• Work Instruction Translator

  Translates a shop floor work instruction into another language while preserving every step and value.

• Scrap Log Analyzer

  Ranks defect types, shares and scrap rate from pasted scrap log rows for a production period.

• Eight D Report Draft

  Drafts a structured 8D corrective action report from a customer or internal quality complaint.

• Audit Finding Classifier

  Grades a quality audit finding as major, minor, observation or improvement opportunity with reasoning.

• Supplier Deviation Notice

  Writes a formal notice to a supplier about a nonconforming delivery with the action required.

• OEE Loss Commentary

  Recomputes OEE from entered figures and explains which loss factor to attack first.

• Control Logic Explainer

  Explains a pasted PLC ladder or structured text routine in plain language for the maintenance team.

• Bill Of Materials Cleaner

  Normalises a pasted bill of materials into clean columns and flags the lines a planner must fix.

• Kaizen Idea Scorer

  Screens a shop floor improvement suggestion with scores and a do now or reject verdict.

• Make Or Buy Verdict

  Recommends making a part in house, buying it out or dual sourcing, with arguments and open data gaps.

• Machine Spec Digest

  Condenses an equipment datasheet into key specs and says whether it fits your site and application.

• Process FMEA Starter

  Turns a described process step into draft PFMEA rows with failure modes, effects, causes and controls.

• Control Plan Draft

  Drafts control plan rows for a process, one per characteristic, with method, frequency and reaction plan.

• Dimension Report Checker

  Compares measured dimensions against their tolerances and flags every out-of-tolerance feature.

• Material Certificate Check

  Checks a pasted material or mill certificate against the grade requirements you specify.

• Capability Study Verdict

  Reads capability study figures and says whether the process is capable, centred and ready to release.

• Work Order Writer

  Turns a rough repair request into a complete maintenance work order ready for the system.

• Spare Part Criticality

  Scores a spare part for criticality and recommends whether to stock it, order it on demand or drop it.

• Lockout Tagout Steps

  Builds a step by step lockout tagout procedure for a machine from its energy sources.

• Safety Data Sheet Digest

  Reduces a pasted safety data sheet to the handling, protection and first aid the shop floor needs.

• Job Hazard Breakdown

  Breaks a task into steps and gives the hazard, exposure and control for each one.

• Waste Walk Classifier

  Sorts shop floor observations into the eight lean wastes and ranks what to remove first.

• Changeover Time Reducer

  Splits a changeover into internal and external steps and proposes a shorter sequence.

• Five S Audit Score

  Scores a work area against the five S standards and gives the actions that lift the weakest one.

• Error Proofing Ideas

  Proposes poka-yoke controls that make a recurring mistake hard or impossible to repeat.

• Job Sequence Planner

  Orders a list of open jobs into a run sequence and explains the trade-offs behind it.

• Supplier Scorecard Comment

  Turns supplier delivery and quality figures into a scorecard commentary with the actions to demand.

• Quote Comparison Verdict

  Compares supplier quotes on a common basis and recommends which one to award.

• Stock Item Classifier

  Classifies stock lines into ABC value bands and gives the stocking rule for each band.

• Change Request Draft

  Writes a formal engineering change request with the reason, the impact and the approvals needed.

• Manufacturability Review

  Reviews a part description against the chosen process and lists the features that will cause trouble.

• Material Selection Shortlist

  Shortlists candidate materials for a part and names the trade-off that decides between them.

• Process Parameter Adviser

  Suggests the parameter changes most likely to remove a recurring process defect.

• Spec Sheet Writer

  Turns internal engineering data into a clean customer facing product specification sheet.

• Skills Gap Planner

  Compares operator skills against what the line needs and returns a ranked training plan.

• Operator Quiz Builder

  Generates competency questions and an answer key from a work instruction to verify training.

• Customer Complaint Reply

  Drafts the reply to a customer quality complaint, with what was found and what happens next.

• Packing Instruction Writer

  Writes the packing and labelling instruction for a part so it ships without transit damage.

• Calibration Due List

  A dated list of every instrument already overdue for calibration and every one falling due inside your chosen window.

• Cycle Time Bottleneck

  A ranked operation by operation cycle time table that names the bottleneck holding your line back.

• Batch Record Review

  A list of the missing entries and out of limit values in a completed batch record, with the questions to put to the operator.

• Manual Procedure Finder

  The numbered procedure for one maintenance task, drawn only from the machine manual you upload.

• Energy Invoice Breakdown

  A line by line breakdown of a site energy invoice, including the energy consumed per unit produced.

• Supply Agreement Risks

  A clause referenced map of the obligations, penalties and termination triggers buried in a supply agreement.

• Breakdown Log Digest

  A ranking of your worst assets by downtime, with the faults that keep coming back on each one.

• Spec Compliance Matrix

  A clause by clause verdict on whether your plant can meet a customer specification, with a compliance percentage.

• Incoming Inspection Plan

  A receiving inspection plan listing every characteristic, its tolerance, method, sample size and accept rule.

• Nameplate Asset Record

  A typed asset record, make, model, serial and ratings, read straight off a photo of a machine nameplate.

• Part Defect Describer

  An objective description and defect classification of a photographed part, ready to paste into a nonconformance record.

• Pallet Label Capture

  Every field on an incoming pallet label typed out and checked against the purchase order you expected.

• HMI Screen Decoder

  A transcription of the fault on a machine screen, what it is reporting, and the safe checks to make before calling maintenance.

• Tool Wear Describer

  A description of the wear visible on a photographed cutting edge, with a severity rating out of five.

이 애플리케이션에 관한 질문

애플리케이션을 우리 업무 방식에 맞출 수 있나요?

네. 각 요금제에는 맞춤 설정할 수 있는 애플리케이션이 일정 수 포함되어 있어, 필드와 지침을 업무 방식에 맞출 수 있습니다.

무엇을 준비해야 하나요?

메모, 메시지, 문서 발췌 등 필드에서 요구하는 내용만 입력하면 됩니다. 업무에 필요한 범위를 넘는 개인정보는 공유하지 마세요.

자체 소프트웨어에서 이 애플리케이션을 실행할 수 있나요?

네. Ultineo AI API는 프로젝트에서 사용할 수 있는 모든 애플리케이션을 실행하고, 실행이 완료되면 응답을 반환합니다.