이 애플리케이션이 맡는 업무
- 중단 안내 완료
공급 중단 안내문을 작성하고, 중단 원인을 코드화하고, 네트워크 고장의 우선순위를 정합니다.
- 검침값 확인 완료
계량기 검침값의 타당성을 확인하고 현장 조사의 세부 정보를 추출합니다.
- 요금 설명 완료
고객에게 요금 급증의 이유를 설명하고 사용량에 맞는 요금제를 안내합니다.
이 업종의 애플리케이션
Outage Notice Composer
Returns a ready-to-send customer notice about a supply interruption, written from the incident facts you paste.
Network Fault Priority
Returns a priority level, fault category, crew type and justification for an incoming network fault report.
Outage Cause Coder
Returns a standard outage cause code, sub-cause, confidence level and supporting evidence from a field report.
Meter Reading Sanity Check
Returns the calculated consumption, daily average and a verdict on whether a submitted meter reading should be accepted or queried.
Bill Spike Explainer
Returns a plain-language explanation a contact-centre agent can read out for why a customer's energy bill increased.
Tariff Fit Advisor
Returns a recommended tariff and runner-up from the options you paste, with reasons tied to the customer's usage pattern.
Site Survey Extractor
Returns the technician's solar site survey as a structured field-by-field record with gaps marked.
Solar Proposal Narrative
Returns a customer-facing written summary of a proposed solar or battery installation from its technical specification.
Pre Job Safety Brief
Returns a five-minute pre-job safety briefing for the described utility field task and site conditions.
Switching Sequence Reviewer
Returns a list of ordering gaps, missing earthing steps and ambiguous wording found in a written switching schedule.
Energy Audit Digest
Returns a structured write-up of a site energy walkthrough with losses grouped by system and measures ranked by effort.
Charge Point Fault Triage
Returns ranked likely causes plus remote and on-site checks for a reported EV charge point fault.
Utility Complaint Reply
Returns a formal reply to a utility customer complaint based on your investigation findings and approved remedy.
Priority Services Screener
Returns a vulnerability score, support band and the actions to offer a customer on the priority services register.
Work Order Clarifier
Returns a clear, step-by-step field work order expanded from a dispatcher's shorthand note.
Leak Report Prioritiser
Returns an urgency score, response band and the crew to send for a reported water leak.
Connection Pack Checklist
Returns the grouped checklist of documents, drawings and consents needed for a network connection application.
Field Notice Translator
Returns a customer notice about planned works or supply interruptions translated into the target language.
Tender Obligation Extractor
Returns every supplier obligation found in a pasted utility tender clause, with clause reference, type and deadline.
Substation Patrol Digest
Returns a condition summary, tagged new defects and the status of previously open defects from substation patrol notes.
Major Outage Review
Returns a structured post-incident review of a major supply interruption with timeline, contributing factors and lessons.
Control Room Handover
Returns a clean control room handover note grouped by live faults, work in progress and watch items.
Commissioning Test Reviewer
Returns a pass or fail verdict for each commissioning test result against the acceptance limits you paste.
Asset Health Scorer
Returns a condition score, health band and intervention window for a network asset from its inspection findings.
Asset Replacement Case
Returns a written investment justification for replacing or refurbishing an ageing network asset.
Streetworks Notice Drafter
Returns highway-authority and resident wording for a planned excavation, covering dates, traffic management and access.
Field Incident Report
Returns a formal incident report from a field account, with the sequence of events, injuries and immediate actions.
Near Miss Categoriser
Returns a hazard category, potential severity and a toolbox-talk learning point for a reported near miss.
Root Cause Walkthrough
Returns a five-why chain, the underlying root cause and corrective actions for an equipment or process failure.
Water Quality Triage
Returns likely causes, urgency and customer advice for a report of discoloured, cloudy or bad-tasting tap water.
Pollution Incident Note
Returns a regulator-ready description of a discharge or spill, covering cause, extent, containment and follow-up.
Effluent Consent Check
Returns a per-parameter comparison of sample results against the discharge consent limits you paste, with breaches flagged.
Unsafe Appliance Notice
Returns the customer warning notice for a gas appliance an engineer has found and classified as unsafe.
Turbine Alarm Advisor
Returns ranked causes, reset guidance and the site visit trigger for a wind turbine alarm sequence.
Heat Pump Screener
Returns a heat pump suitability verdict with the blockers, implied fabric work and the questions a surveyor must answer.
Retrofit Plan Sequencer
Returns the home energy measures you listed put into a sensible order, with the reason each one comes first.
Repayment Plan Letter
Returns a supportive letter setting out an energy debt repayment arrangement from the balance and circumstances supplied.
Complaint Router
Returns the category, severity, owning team and deadline flag for an inbound utility complaint.
Tariff Terms Digest
Returns a plain-language key-facts summary of the energy contract terms you paste, with the costly clauses highlighted.
Tenancy Change Checklist
Returns the readings, data and confirmations needed to close one occupier's supply account and open the next.
Home Energy Action Plan
Returns a homeowner-friendly plan explaining each energy certificate recommendation and what installing it involves.
Load Profile Reader
Returns what a described consumption pattern says about a site, with anomalies and questions for the site contact.
Emissions Data Extractor
Returns the energy and fuel activity data found in your notes, structured with units, source and scope gaps marked.
Energy Claim Checker
Returns a risk rating and a safer rewrite for each environmental claim in your energy marketing copy.
Regulation Clause Brief
Returns a plain-English briefing on a pasted licence or regulatory clause, listing obligations and who they fall on.
Authorisation Gap Check
Returns the competencies a technician still needs for a task, with the evidence required and an interim arrangement.
Wayleave Terms Summary
Pulls the access rights, payments, notice periods and termination terms out of a signed wayleave or easement agreement.
PPA Clause Digest
Turns a power purchase agreement into a one-page digest of price mechanism, term, volume commitments and exit routes.
Network Charge Breakdown
Breaks a network use-of-system invoice into its charge components and flags the lines that look out of place.
Calibration Cert Reader
Reads a calibration or test certificate and returns the instrument details, result and next-due date as one register line.
Method Statement Review
Reviews a contractor's risk assessment and method statement and lists the sections, controls and approvals that are missing.
Portfolio Usage Outliers
Scans a multi-site consumption export and names the sites whose usage pattern no longer matches the rest.
Monthly Energy Narrative
Turns the monthly metering export into the written commentary that goes in front of the board.
Gas Safety Record Digest
Reads a gas safety record and separates the appliances that passed from the defects needing action, with their dates.
Guaranteed Standards Check
Reads an interruption or case record and says whether a guaranteed standards payment is due, and on what grounds.
Meter Face Reader
Reads the register, serial number and meter type from a photo of a meter and flags any digit it cannot see clearly.
Asset Plate Capture
Turns a photo of an equipment rating plate into a filled-in asset register line.
Storm Damage Triage
Sorts a photo of storm-damaged network plant into an urgency band with the hazards visible in the picture.
Vegetation Clearance Note
Looks at a photo of trees near an overhead line and recommends cutting now, scheduling, or leaving it to monitor.
Repair Photo Writeup
Drafts the completion note for the job record from the photo the technician took at the end of the repair.
애플리케이션 작동 방식
- 업무 선택
각 애플리케이션은 해당 업종의 업무 하나를 맡으며, 한 문장으로 설명되어 있습니다.
- 필드 입력
애플리케이션이 요구하는 필드에 메모, 메시지, 문서 발췌를 붙여 넣습니다.
- 응답 활용
복사, 전송, 보관할 수 있는 구조화된 결과를 읽거나 Ultineo AI API로 가져옵니다.
이 애플리케이션에 관한 질문
네. 각 요금제에는 맞춤 설정할 수 있는 애플리케이션이 일정 수 포함되어 있어, 필드와 지침을 업무 방식에 맞출 수 있습니다.
메모, 메시지, 문서 발췌 등 필드에서 요구하는 내용만 입력하면 됩니다. 업무에 필요한 범위를 넘는 개인정보는 공유하지 마세요.
네. Ultineo AI API는 프로젝트에서 사용할 수 있는 모든 애플리케이션을 실행하고, 실행이 완료되면 응답을 반환합니다.